Aprilog makes & stocks IC adapters for QFP, TQFP, QFN, MLF, SOIC, SSOP, TSSOP, TSOP, VSOP, SOP, PLCC, PGA & SOT packages and stocks test sockets by Enplas, Plastronics, Sensata, Yamaichi & Tokyo Electech. Programming adapters, IC footprint chip changing adapters, and ZIF socket to PCB pads adapters. Adapters for Microchip PIC, Intel, NXP, ST, Freescale, and many more. We also build custom adapters to meet your special needs.
Signal Isolator Adapters
This adapter provides an easy way to disconnect signals from a component under test. It consist of a signal switch module mounted with a test socket, and an interface base that is soldered to the circuit board SMT pads.
This adapter replaces the component on the target card and accepts the same component package. Each adapter lead has a switch mounted in series. Each switch has test pins on both sides of the switch to monitor the card and the component. Another use of the test pins is to re-rout signals from one pin to another.
Adapters are listed in ascending pin count order.
8 Pins 16 Pins 20 Pins 28 Pins 32 Pins 40 Pins 44 Pins 48 Pins
52 Pins 64 Pins 68 Pins 80 Pins 84 Pins 100 Pins 176 Pins  


Part Number Click Enlarge 8 Pin $ Add
ISV8SO15-SO-ZO-SD   Vertical signal isolator for 8 pin SOIC SMT component.
  • 8 Pin SOIC package
  • Open top socket
  • 150 mil Component body width
  • 50 mil pitch
  • Spare SMT base is part number 8SO15-SD
$110.00
ISV8SO17-SO-ZO-SD   Vertical signal isolator for 8 pin SOIC SMT component.
  • 8 Pin SOIC package
  • Open top socket
  • 170 mil Component body width
  • 50 mil pitch
  • Spare SMT base is part number 8SO17-SD
$110.00
ISV8SO21-SO-ZO-SD   Vertical signal isolator for 8 pin SOIC SMT component.
  • 8 Pin SOIC package
  • Open top socket
  • 210 mil Component body width
  • 50 mil pitch
  • Spare SMT base is part number 8SO21-SD
$110.00
ISV8SO30-SO-ZO-SD   Vertical signal isolator for 8 pin SOIC SMT component.
  • 8 Pin SOIC package
  • Open top socket
  • 300 mil Component body width
  • 50 mil pitch
  • Spare SMT base is part number 8SO30-SD
$110.00

Part Number Click Enlarge 16 Pin $ Add
ISV16SO15-SO-ZO-SD   Vertical signal isolator for 16 pin SOIC SMT component.
  • 16 Pin SOIC package
  • Open top socket
  • 153 mil Component body width
  • 50 mil pitch
  • Spare SMT base is part number 16SO15-SD
$125.00
ISH16SO30-SO-ZO-SD Horizontal signal isolator for 16 pin SOIC SMT component. Horizontal signal isolator for 16 pin SOIC SMT component.
  • 16 Pin SOIC package
  • Open top socket
  • 300 mil Component body width
  • 50 mil pitch
  • Spare SMT base is part number 16SO30-SD
$160.00
ISV16SO30-SO-ZO-SD   Vertical signal isolator for 16 pin SOIC SMT component.
  • 16 Pin SOIC package
  • Open top socket
  • 300 mil Component body width
  • 50 mil pitch
  • Spare SMT base is part number 16SO30-SD
$125.00
ISV16SSOS17-SSOS-ZO-SD   Vertical signal isolator for 16 pin SSOP SMT component.
  • 16 Pin SSOP package
  • Open top socket
  • 173 mil Component body width
  • 0.65mm pitch
  • Spare SMT base is part number 16SSOS17-SD
$240.00
ISV16SO30-SO-ZO-SD   Vertical signal isolator for 16 pin SOIC SMT component.
  • 16 Pin SOIC package
  • Open top socket
  • 300 mil Component body width
  • 50 mil pitch
  • Spare SMT base is part number 16SO30-SD
$125.00

Part Number Click Enlarge 20 Pin $ Add
ISH20SSOS21-SSOS-ZO-SD   Horizontal signal isolator for 20 pin SOIC SMT component.
  • 20 Pin SSOP package
  • Open top socket
  • 208 mil Component body width
  • 65 mil pitch
  • Spare SMT base is part number 20SSO21-SD
$220.00
ISH20SO30A-SO-ZO-SD Horizontal signal isolator for 20 pin SOIC SMT component.
  • 20 Pin SOIC package
  • Open top socket
  • 300 mil Component body width
  • 50 mil pitch
  • Spare SMT base is part number 20SO30-SD
$180.00
ISV20SO21-SO-ZL-SD   Vertical signal isolator for 20 pin SOIC SMT component with hinge lid, clamshell socket.
  • 20 Pin SOIC package
  • Open top socket
  • 208 mil Component body width
  • 50 mil pitch
  • Spare SMT base is part number 20SO21-SD
$240.00
ISV20SO30A-SO-ZO-SD   Vertical signal isolator for 20 pin SOIC SMT component with hinge lid, clamshell socket.
  • 20 Pin SOIC package
  • Open top socket
  • 300 mil Component body width
  • 50 mil pitch
  • Spare SMT base is part number 20SO30-SD
$150.00

Part Number Click Enlarge 28 Pin $ Add
ISH28SSOS17-SSOS-ZO-SD Horizontal signal isolator for 28 pin SSOP SMT component. Horizontal signal isolator for 28 pin SSOP SMT component.
  • 28 Pin SSOP package
  • Open top socket
  • 173 mil Component body width
  • 65 mil pitch
  • Spare SMT base is part number 28SSOS17-SD
$240.00
ISH28SSOS21-SSOS-ZO-SD Horizontal signal isolator for 28 pin SSOP SMT component. Horizontal signal isolator for 28 pin SSOP SMT component.
  • 28 Pin SSOP package
  • Open top socket
  • 208 mil Component body width
  • 65 mil pitch
  • Spare SMT base is part number 28SSOS21-SD
$240.00
ISH28SO30A-SO-ZL-SD Horizontal signal isolator for 20 pin SOIC SMT component. Horizontal signal isolator for 20 pin SOIC SMT component.
  • 28 Pin SOIC package
  • Clamshell type socket
  • 300 mil Component body width
  • 50 mil pitch
  • Spare SMT base is part number 28SO30-SD
$200.00

Part Number Click Enlarge 32 Pin $ Add
ISV32QFS31-QF-ZO-SD   Vertical signal isolator for 32 pin QFP square SMT components.
  • 32 Pin QFP package
  • 7.0mm Component body width
  • 9.0mm Leads Tip to tip
  • 0.8mm pitch
  • Spare SMT base is part number 32QFS31-SD
$370.00

Part Number Click Enlarge 40 Pin $ Add
ISV40D6-D6   Vertical signal isolator for 40 pin DIP components. Vertical signal isolator for 40 pin DIP components.
  • 40 Pin DIP package
  • Top pin receptacle rows are 600 mils apart.
  • Pin rows are are 600 mils apart.
  • 0.1 inch pitch
$10.00

Part Number Click Enlarge 44 Pin $ Add
ISV44PG-PL Vertical signal isolator for 44 pin PLCC square components. Vertical signal isolator for 44 pin PLCC square components. The isolator receptacle accepts a common through-hole PLCC 44 socket pins. The bottom of the adapter is a plug that fits into a standard 44 pin PLCC socket.
  • Top - PGA receptacles for standard PLCC through-hole pins
  • Bottom - 44 Pin PLCC plug
  • 50 mil pitch
$250.00
ISV44PL-PL Vertical signal isolator for 44 pin PLCC square components. Vertical signal isolator for 44 pin PLCC square components. The isolator top is a standard PLCC 44 socket. The bottom of the adapter is a plug that fits into a standard 44 pin PLCC socket. PLCC socket is replaceable.
  • Top - PLCC socket for standard PLCC through-hole pins
  • Bottom - 44 Pin PLCC plug
  • 50 mil pitch
$255.00
ISV44QFS31A-QF-ZL-SD Vertical signal isolator for 44 pin QFP square SMT components. Vertical signal isolator for 44 pin QFP square SMT components.
  • 44 Pin QFP package
  • 9.0mm Component body width
  • 12.0mm Leads Tip to tip
  • 0.8mm pitch
  • Spare SMT base is part number 44QFS31-SD
$400.00
ISV44QFS31C-QF-ZL-SD Vertical signal isolator for 44 pin QFP square SMT components. Vertical signal isolator for 44 pin QFP square SMT components.
  • 44 Pin QFP package
  • 9.0mm Component body width
  • 12.6mm Leads Tip to tip
  • 0.8mm pitch
  • Spare SMT base is part number 44QFS31B-SD
$400.00

Part Number Click Enlarge 48 Pin $ Add
ISV48QFS20-QF-ZO-SD Vertical signal isolator for 48 pin QFP square SMT components. Vertical signal isolator for 48 pin QFP square SMT components.
  • 48 Pin Square QFP
  • 7.0mm Package body width
  • 9.0mm Leads Tip to tip
  • 0.5mm Pitch device
  • Spare SMT base is part number 48QFS20-SD
$520.00

Part Number Click Enlarge 52 Pin $ Add
ISV52PG-PL Vertical signal isolator for 52 pin PLCC square components. Vertical signal isolator for 52 pin PLCC square components. The isolator receptacle accepts a common through-hole PLCC 52 socket pins. The bottom of the adapter is a plug that fits into a standard 52 pin PLCC socket.
  • Top - PGA receptacles for standard PLCC through-hole pins
  • Bottom - 52 Pin PLCC plug
  • 50 mil pitch
$260.00
ISV52PL-PL Vertical signal isolator for 52 pin PLCC square components. Vertical signal isolator for 52 pin PLCC square components. The isolator top is a standard PLCC 52 socket. The bottom of the adapter is a plug that fits into a standard 52 pin PLCC socket. PLCC socket is replaceable.
  • Top - PLCC socket for standard PLCC through-hole pins
  • Bottom - 52 Pin PLCC plug
  • 50 mil pitch
$255.00
ISV52QFS26A-QF-ZL-SD   Vertical signal isolator for 52 pin QFP square SMT components.
  • 52 Pin QFP package
  • 10.0mm Component body width
  • 13.2mm Leads Tip to tip
  • 0.65mm pitch
  • Spare SMT base is part number 52QFS26SD
$430.00

Part Number Click Enlarge 64 Pin $ Add
ISV64QFS20-QF-ZL-SD Vertical signal isolator for 64 pin TQFP square SMT components. Vertical signal isolator for 64 pin TQFP square SMT components.
  • 64 Pin QFP package
  • 10.0mm Component body width
  • 12.0mm Leads Tip to tip
  • 0.5mm pitch
  • Spare SMT base is part number 64QFS20-SD
$500.00

Part Number Click Enlarge 68 Pin $ Add
ISV68PG-PL Vertical signal isolator for 68 pin PLCC square components. Vertical signal isolator for 68 pin PLCC square components. The isolator receptacle accepts a common through-hole PLCC 68 socket pins. The bottom of the adapter is a plug that fits into a standard 68 pin PLCC socket.
  • Top - PGA receptacles for standard PLCC through-hole pins
  • Bottom - 68 Pin PLCC plug
  • 50 mil pitch
$270.00
ISV68PL-PL Vertical signal isolator for 68 pin PLCC square components. Vertical signal isolator for 68 pin PLCC square components. The isolator top is a standard PLCC 68 socket. The bottom of the adapter is a plug that fits into a standard 68 pin PLCC socket. PLCC socket is replaceable.
  • Top - PLCC socket for standard PLCC through-hole pins
  • Bottom - 68 Pin PLCC plug
  • 50 mil pitch
$275.00

Part Number Click Enlarge 80 Pin $ Add
ISV80QFS20-QF-ZO-SD   Vertical signal isolator for 80 pin TQFP square SMT components.
  • 80 Pin QFP package
  • 12.0mm Component body width
  • 14.0mm Leads Tip to tip
  • 0.5mm pitch
  • Spare SMT base is part number 80QFS20-SD
$550.00

Part Number Click Enlarge 84 Pin $ Add
ISV84PG-PL Vertical signal isolator for 84 pin PLCC square components. Vertical signal isolator for 84 pin PLCC square components. The isolator receptacle accepts a common through-hole PLCC 84 socket pins. The bottom of the adapter is a plug that fits into a standard 84 pin PLCC socket.
  • Top - PGA receptacles for standard PLCC through-hole pins
  • Bottom - 84 Pin PLCC plug
  • 50 mil pitch
$280.00
ISV84PL-PL   Vertical signal isolator for 84 pin PLCC square components. The isolator top is a standard PLCC 84 socket. The bottom of the adapter is a plug that fits into a standard 84 pin PLCC socket. PLCC socket is replaceable.
  • Top - PLCC socket for standard PLCC through-hole pins
  • Bottom - 84 Pin PLCC plug
  • 50 mil pitch
$285.00

Part Number Click Enlarge 100 Pin $ Add
ISV100QFR26A-QF-ZO-SD   Vertical pin/signal isolator for 100 pin Rectangular SMT components. Vertical pin isolator for 100 pin Rectangular SMT components. $605.00
ISV100QFS20-QF-ZO-SD   Vertical pin isolator for 100 pin TQFP square SMT components. Vertical pin isolator for 100 pin TQFP square SMT components.
  • QFP Package Type
  • 100 Pins
  • 14.0mm Package body width
  • 16.0mm Leads Tip to tip
  • 0.5mm Pitch device
  • Open ZIF socket is 3014-100-6-08
  • Spare SMT base is part number 100QFS20-SD

For components such as PIC18F8620, PIC18F8621, PIC18F8622, PIC18F8627, PIC18F8680, PIC18F86J10, PIC18F86J11, PIC18F86J15, PIC18F86J16, PIC18F86J50, PIC18F86J55, PIC18F86J60, PIC18F86J65 PIC18F8720, PIC18F8722, PIC18F87J10, PIC18F87J11, PIC18F87J50, PIC18F87J60 PIC24FJ118GA108, PIC24FJ128GA008, PIC24FJ128GB108, PIC24FJ192GA108, PIC24FJ192GB108, PIC24FJ256GA108, PIC24FJ256GB108, PIC24FJ64GA008, PIC24FJ64GB108, PIC24FJ96GA008 dsPIC30F5013, dsPIC30F5016, dsPIC30F6010A, dsPIC30F6013A, dsPIC30F6014A, dsPIC33FJ128GP708, dsPIC33FJ128MC708, dsPIC33FJ64GP708, dsPIC33FJ64MC508
$605.00

Part Number Click Enlarge 176 Pin $ Add
ISV176QFS20-QF-ZO-SD   Vertical pin isolator for 176 pin TQFP square SMT components. Vertical pin isolator for 176 pin TQFP square SMT components.
  • QFP Package Type
  • 176 Pins
  • 24.0mm Package body width
  • 26.0mm Leads Tip to tip
  • 0.5mm Pitch device
  • Open ZIF socket is 3024-176-6-08-ST
  • Spare SMT base is part number 176QFS20-SD
$920.00



     Specs Discounts Delivery
Logic-analyzer-adapter.com is a division of Enable Engineering Co., Inc.